With a utility knife, cut via just the paper along this line. Cut a piece of drywall slightly smaller than the hole so it suits easily into the opening. Use a hammer to softly tap the wall to trigger a slight despair. You also can use the rounded finish of a screwdriver (or different software) and tap the opposite end with a hammer for more accuracy. Filling this depression will give you probably the most invisible patch since you don’t have to “feather” the repair to make it seem flat.
As an alternative choice to flicking compound, you can use textured spray in quite a lot of finishes. Shake the can and spray the patch space in a circular motion 6-18 inches from the wall. Textured drywall is a little more complicated, however still fairly easy to repair. Finish all repairs with a final light sanding to ensure a satin … Read More